CCS v5.5 not generating .out file

Shehzad

On Saturday I have built a project, it was working fine but today after deleting its debug folder and building it again, it is not generating .out file.

Console window shows only this

**** Build of configuration Debug for project BlinkDSK6416 ****

C:\ti\ccsv5\utils\bin\gmake -k all

**** Build Finished ****

there is no error and warning.

over 10 years ago

0 Arvind Singh over 10 years ago

Mastermind 6115 points

Hi,

This problem might occur, when we try to build project without cleaning it.
Have you cleaned the project, also try with rebuild option.

0 Shehzad over 10 years ago in reply to Arvind Singh

Intellectual 320 points

yes I have cleaned the project and also rebuild it.

0 Shehzad over 10 years ago in reply to Shehzad

Intellectual 320 points

i am surprised!! Its start working after restarting code composer studio!! what is this?

0 Titusrathinaraj Stalin over 10 years ago in reply to Shehzad

TI__Guru** 116100 points

You should not delete the debug folder manually since system will think that project is not cleaned and no code changes done in project so project is not building when you click "build" option, instead you have to use "clean the project" option to clean and delete the old built object files then you can delete the debug folder, now you can use build or rebuild the project.

0 Shehzad over 10 years ago in reply to Titusrathinaraj Stalin

Intellectual 320 points

thank you T Stalin!

Processors

Processors forum

CCS v5.5 not generating .out file