• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 97 subscribers
  • Views 274 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How to load UBoot on a new in-house OMAP-L138 chip

GrantHatamosa
Expert 1930 points
Other Parts Discussed in Thread: OMAP-L138

Hi,

We are designing a prototype with an OMAP-L138. We have been using Logic PDs EVM currently for development so we would like to know how we will be able to load the bootloader used in the Logic PD EVM into our custom prototype.

I would appreciate if you can provide information on the SW tool to use, where to get the UBoot binary, and such.

Thanks.

  • 0
    TI__Guru 62975 points

    Grant,

    Do you intend to use SPI boot like the Logic PD EVM?  If so, you would just need to hook up a SPI flash and configure your bootstrap pins for SPI boot like the EVM.

    -Tommy

  • 0
    Expert 1930 points

    Follow the procedure in these links:

    http://processors.wiki.ti.com/index.php/How_to_connect_to_the_OMAP-L138/C6748_EVM_board_using_CCS%3F

    http://processors.wiki.ti.com/index.php/GSG:_Building_Software_Components_for_OMAP-L1#Rebuilding_the_SPI_Flash_writer