• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 96 subscribers
  • Views 230 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320C6713B issues

Mac Chen
Intellectual 590 points

Hi Sir, 

pls help to clarify the issues. thanks !

1. If I found something wrong after the power has been turned on. (ex: Edian, EMIF clock fail). Does it  "have to " reset the power again ?

 2. Should I have the power sequence for 1.2V and 3.3V power ? any suggestion?

Mac. 

  • 0
    TI__Mastermind 43660 points
    Mac Chen,

    If there is any issue you are facing after power on, the device might not have been initialized properly. So you may need to reset it again to get back into normal condition. There is no specific power sequence applicable for C6713B, however you may need to ensure that neither supply is powered up for extended periods of time (>1 second) if the other supply is below the proper operating voltage.

    Regards,
    Senthil