How to display a Monochrome Image from Ip camera to LCD on EVM dm 8148?

Hello,

Are you able to run the IPcamera?

I would also recommend you to check with your FAE the IPNC software.

BR
Margarita

Hi,

Yup able to get the stream , Converted it to grayscale and plotted it on "Graphic display" LCD , though i am getting Low fps of around 5 or so , Any suggestion that might help in getting better fps ?

Regards

Ammar Zafar

Is there any way that if i can receive Data using DSP core and display using A8 ?

I am using NDK on EVM Dm 8148 , My task is to get the stream of an ip camera . I have been able initiate the stream with the camera but i am loosing udp frames . I am running my program on DSP core of DM 8148 , i am printing the id of frames , which shows me that first 3 frames are dropped and next 4 frames are received properly but after that i start loosing 8-10 frames.

Hello Ammar,

I am not aware with NDK.
But you could check this thread, it could be in help :
e2e.ti.com/.../488824

You could check where the frames are dropped between the camera and the dm8148 or else.
Check what is the CPU load.
Are you using v4l2 capture driver?

BR
Margarita