Hi All :
Try boot-up DM6437 NAND Flash, but not work, Step as below :
1. CCS3.3 load and build video_preview project.
2. genAIS.pl -i video_preview.out -o video_preview.bin -otype bin -bootmode nand
3. CCS3.3 load and run NANDWrite project , write video_preview.bin to nand flash.
4. PowerOFF/ON Target board, but boot failed, no have any response.
BOOTMODE config setting
SW1 : 11101000 SW2 : 0011
Can anyone give me some advise ? lose something ?
B.R.
Allen
