K2H14 SUPPORTS EMIF NAND BOOT

Sakthi Annamalai

Other Parts Discussed in Thread: 66AK2H14

Hi,

I have made the custom board using 66AK2H14 with NAND (Part No:MT29F4G08ABBDAHC-IT ) as the only boot device connected to chip enable (CE0). Whether the latest mcsdk version supports NAND boot or not .

Regards,

Sakthi.A

over 9 years ago

0 Titusrathinaraj Stalin over 9 years ago

TI__Guru** 116100 points

Yes, it does support NAND boot in all the K2 MCSDK releases including latest MCSDK 3_1_4_7.

I would like you to try the platform library test code for your custom NAND device.

0 Sakthi Annamalai over 9 years ago in reply to Titusrathinaraj Stalin

Intellectual 610 points

Hi Titus,

Will check as per your suggestion and let you know the updates.

Regards,
Sakthi.A

0 Titusrathinaraj Stalin over 9 years ago in reply to Sakthi Annamalai

TI__Guru** 116100 points

Dear Sakthi,
Here is the platform library location.
~ti\pdk_keystone2_3_01_04_07\packages\ti\platform\evmk2h\platform_test

0 Raja over 9 years ago

TI__Guru* 81335 points

Yes. MCSDK supports NAND boot. In EVM, NAND flash is mounted on CE0 EMIF. As mentioned by Titus above, you can validate NAND by updating platform and NAND writer source according to selected part number.

Thank you.

Processors

Processors forum

K2H14 SUPPORTS EMIF NAND BOOT