66AK2HX EVM Connectors

Dan LaChance

Hello TI,

Is the only eval board for this device one on the website? www.ti.com/tool/evmk2h

- I believe the answer is YES.

My customer needs information on the connections.

- It seems to have edge fingers and a backplane connector. Does this plug into anything standard? We’d like to get some of the interfaces to a cable to attach to their card as a development platform.

- What's the best document to reference for this topic?

Thanks,

Dan

over 9 years ago

0 Senthilkumar Srinivasan over 9 years ago

TI__Mastermind 43660 points

Dan,

Yes, there is no evaluation board available for K2H other other than EVMK2H.

Yes, the edge finger connector is an AMC connector. This AMC card edge connector plugs into an AMC compatible carrier board and provides 4 Serial RapidIO lanes, 2 PCIe lanes, 2 SGMII port, 2 AIF lanes and system interfaces to the carrier board.

The edge connectors J1 and J2 are having hyperlink, XFI and AIF interfaces.

Please refer EVMK2H technical reference manual for more details about these connectors.

wfcache.advantech.com/.../XTCIEVMK2X_Technical_Reference_Manual_Rev1_0.pdf

Regards,
Senthil

0 Brian Walker27 over 9 years ago

TI__Prodigy 265 points

For the AMC slot, see this catalog on page 16:
www.digikey.com/.../Conec_MicroTCACatalog.pdf

The J1 and J2 connectors are called ZDplus and their catalog can be found here:
www.erni.com/.../ERNI-ERmetZDplus-e.pdf

Processors

Processors forum

66AK2HX EVM Connectors