L138/C6748 LCDK: Which Starterware?

dspRookie

Other Parts Discussed in Thread: OMAPL138

On the Starterware page, we have found an L138 version and a C6748 version. Does the L138/C6748 LCDK prefer one over the other?

Mike Briggs

over 9 years ago

0 Titusrathinaraj Stalin over 9 years ago

TI__Guru** 116100 points

Dear Mike,
You can use either C6748 starterware or OMAPL138 starterware if you want to work with DSP application.
Both are using the same source code and has some fixes.

You must use OMAPL138 starterware if you want to work with ARM application.

BTW, you won't find DSP based bootloader in OMAPL138 starterware package since ARM is the master which requires boot SW.

Which board do you have now ?

0 dspRookie over 9 years ago in reply to Titusrathinaraj Stalin

Intellectual 430 points

Thank you, Titus. That answers the question. We have the L138/C6748 LCDK (14 of them). It is described here: processors.wiki.ti.com/.../C6748_Development_Kit_(LCDK)

Mike Briggs

Processors

Processors forum

L138/C6748 LCDK: Which Starterware?