• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 311 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How to enable 8 ports GbE on EVMK2H?

Omin Chou
Genius 3555 points

Hi all,

I know EVMK2H has 8 Gigabit Ethernet ports supporting 10/100/1000 Mbps data-rate. So, I used mcsdk_3_01_04_07 to check 8 ports GbE working simultaneously in kernel. Seemed only eth0 and eth1 via RJ-45 connector could be verified. Furthermore, eth0 and eth1 could not work at the same time.

My queries are as below.

1. How to enable 8 ports GbE in DTS?

2. How to let 8 ports GbE work simultaneously in kernel?

B.R.

OC