• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 170 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM5718 has shorted inside.

ike
Prodigy 70 points
Other Parts Discussed in Thread: AM5718, AM5728

When I applied several times a 3.3V to AM5718,
AM5718 was broken by short inside.
Do you know the measures?

(I used the power circuit of AM5728)

  • 0
    TI__Guru**** 161600 points

    Hi,

    How do you apply 3.3V to AM5718? Which device pads?

    Have you considered the electrical characteristics & the recommended operation conditions from the data sheet?

    Can you post the relevant part of the schematic? You can request a schematic review through your local FAE.

    Best Regards, 
    Yordan