OMAP-L137 - problems with RTDX

Martin Bejvl

Other Parts Discussed in Thread: OMAP-L137, CCSTUDIO

Hi, All

I have equipment OMAP-L137EVM (ARM9_0 + TMS320C6747) with software support Code Composer Studio v3.3
I have some problem with it.

I would like to start RTDX or HSRTDX communication between OMAP-L137 and the host PC. But I can´t find „t2h“ and „h2t“ software anywhere in my software equipment. Although I pressed Alt+F7 in total Commander across the whole disc C, „t2h“ and „h2t“ did´nt appear. I haven´t it in my computer. Is it possible to download „t2h“ and „h2t“ somewhere from Internet??? If so, Where???

Yours sincerely

Martin Bejvl
Institute of thermomechanics AV ČR, v. v. i.
Dolejškova 1402/5
182 00 Praha 8
Czech Republic
T: 266 053 588
E: bejvl@it.cas.cz

over 15 years ago

0 tlee over 15 years ago

TI__Guru 62975 points

Martin,

Are you using BIOS?

-Tommy

0 Martin Bejvl over 15 years ago in reply to tlee

Prodigy 50 points

Tommy,

I am not using BIOS. I am not very good at microprocessor technics

I dont know how to install and use it.

Martin

0 tlee over 15 years ago in reply to Martin Bejvl

TI__Guru 62975 points

Martin,

I don't think I understand your situation. How are you trying to connect to the EVM? Is it CCS?

-Tommy

0 Martin Bejvl over 15 years ago in reply to tlee

Prodigy 50 points

Tommy,

I connect to the EVM by USB. I use Code Composer Studio v3.3 (CCS) for communicating with EVM. (CCS)

Martin

0 tlee over 15 years ago in reply to Martin Bejvl

TI__Guru 62975 points

Martin,

I'm not very familiar with those tools. Let me move this over to the CCS forum.

-Tommy

0 desouza over 15 years ago

TI__Guru**** 171004 points

Martin,

The examples you want are located by default in the BIOS installation directory located at:

C:\CCStudio_v3.3\bios_5_31_02\packages\ti\rtdx\examples\basic\

Support for C674x devices is only available in RTDX 2.0, provided with DSP/BIOS releases 5.33.x, but examples were removed with this new RTDX release.

One tip is to download and install the DSP/BIOS 5.33.06 from Update Advisor (menu Help --> Update Advisor --> Check for Updates) and try to adapt the older examples to the new libraries.

Unfortunately I am not 100% familiar with the RTDX porting efforts neither with its current support plans, therefore I am moving this post to the DSP/BIOS forum since you may get better advice from their experts.

Hope this helps,

Rafael

Processors

Processors forum

OMAP-L137 - problems with RTDX