• State TI Thinks Resolved
  • Locked Locked
  • Replies 5 replies
  • Answers 2 answers
  • Subscribers 99 subscribers
  • Views 546 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TCI6638 connection issue when use the Spectrum Digital XDS560v2 STM USB emulator

xuanhui wang
Prodigy 20 points

Hi,

Recently, I use the Spectrum Digital XDS560v2 STM USB emulator to do the tracePod. The ccs edition is 5.4. when i build my target configuration and press the test connection button . it failed and the print log is :

who know the reason?thanks.

  • 0
    TI__Guru* 81335 points

    Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages (for processor issues). Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics (e2e.ti.com). Please read all the links below my signature.

    Log is missing. We recommend you to install CCSv6.1.2 for keystone 2 devices.

    Thank you.

    PS: We strongly recommend you to create new e2e thread for your queries instead of following up on an old/closed e2e thread, new threads gets more attention than old threads and can provide link of old threads or information on the new post for clarity and faster response.

  • 0 in reply to Raja
    TI__Guru* 81335 points
    Also I recommend you to post emulator related issues in CCS forum for appropriate and faster response however EVM related queries can be posted in device forum.

    Thank you.
  • 0 in reply to Raja
    Prodigy 20 points
    Hi,Raja
    thanks for your useful advice . the missing log is here:
    [Start]
    Execute the command:
    %ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
    [Result]
    -----[Print the board config pathname(s)]------------------------------------
    C:\DOCUME~1\TDLTE-~1\LOCALS~1\APPLIC~1\.TI693494126\0\0\BrdDat\testBoard.dat
    -----[Print the reset-command software log-file]-----------------------------
    This utility has selected a 560/2xx-class product.
    This utility will load the program 'sd560v2u.out'.
    Loaded FPGA Image: C:\ti\ccsv5\ccs_base\common\uscif\xds560v2pro.xsvf
    The library build date was 'Apr 2 2013'.
    The library build time was '00:13:51'.
    The library package version is '5.1.73.0'.
    The library component version is '35.34.40.0'.
    The controller does not use a programmable FPGA.
    E_RPCENV_IO_ERROR(-6) No connection: DTC_IO_Receive::dtc_io
    E_RPCENV_IO_ERROR(-6) No connection: DTC_IO_Receive::dtc_io
    -----[An error has occurred and this utility has aborted]--------------------
    This error is generated by TI's USCIF driver or utilities.
    The value is '-252' (0xffffff04).
    The title is 'SC_ERR_ECOM_OPERATE'.

    The explanation is:
    An attempt to operate the USCIF interface via USCIF ECOM has failed.
    [End]
    Do you have any suggestion on how to solve the problem?thanks in advance
  • 0 in reply to xuanhui wang
    TI__Guru* 81335 points

    I hope you are working on Custom board. Please confirm.

    Please refer below wiki for Debugging JTAG Connectivity Problems,

    Thank you.

  • 0 in reply to xuanhui wang
    TI__Guru** 116100 points
    Dear Xuanhui wang,
    Can you please select "Texas Instruments XDS2xx Debug probe" option and do test connection ?
    Remove the XDS560v2 emulator setting.
    Which USB port are you using ?
    After you connected the USB cable into target board, have you checked the PC's device manager and driver got installed ?