DRA7xx(J6) EVM Hypervisor support

Vaibhav Dhingani

Hello,

We have DRA7xx Vayu EVM and we are using ti-glsdk_dra7xx-evm_7_03_00_03 on it.

We want to use Hypervisor for our and auto-motive application on the same EVM and we don't find any information on hypervisor in GLSDK documents.

Can you please share the more information(useful links and documents) on how to use Hypervisor on DRA7xx(J6) Vayu EVM?

over 8 years ago

0 Yordan Kovachev over 8 years ago

TI__Guru**** 161600 points

Hi,

Have a look at the following patch:
lists.denx.de/.../202920.html

Best Regards,
Yordan

0 Vaibhav Dhingani over 8 years ago in reply to Yordan Kovachev

Expert 1540 points

Thanks Yordan,

I applied this patch in our u-boot code and build it. But, EVM is not booting after this change if I enable "CONFIG_DRA7XX_HYPERVISOR_ON".

0 Yordan Kovachev over 8 years ago in reply to Vaibhav Dhingani

TI__Guru**** 161600 points

Hi,

Do you have any output on your console (to point where does your board stop: spl or u-boot)?
Do you use custom dra7xx boar or the reference ti vayu evm?

Best Regards,
Yordan

Processors

Processors forum

DRA7xx(J6) EVM Hypervisor support