SDK for DM368IPNC?

Pan Aaron

Hi, Not sure whether there is linux/windows SDK for DM368IPNC? So we can develop some software on PC to commucation or control the IPNC. Thank you

over 15 years ago

0 Anshuman Saxena over 15 years ago

TI__Mastermind 19985 points

Hi Pan,

What kind of software do you want to develop on PC side? We have Tuning tool on the PC that talks to the IP Camera and has control commands for controlling the image pipe. Also, we have PC side VMS in development. Now, all these are currently planned as binary releases. If you want SDK or PC source code, you might want to contact your local TI sales and they can contact us for the same. We can provide the replies accordingly.

Regards,

Anshuman

PS: Please mark this post as verified, if you think this answers your question. Thanks.

0 Pan Aaron over 15 years ago in reply to Anshuman Saxena

Intellectual 335 points

Hi, Anshuman Thanks for you reply:) So , these Tuning tool and VMS has not been release yet?

0 Anshuman Saxena over 15 years ago in reply to Pan Aaron

TI__Mastermind 19985 points

Hi Pan,

The Tuning tool is already available and you can get it by contacting your local TI sales. VMS is still work in progress and would need some time to be available for customers. You can contact www.godbtech.com also if you need any specific PC side tools for controlling IP camera. They have developed the GUI on PC using their SDK and can help you with customizing it or creating new PC tools.

Regards,

Anshuman

0 Pan Aaron over 15 years ago in reply to Anshuman Saxena

Intellectual 335 points

Hi , Anshuman

Get it , thank you :)

Processors

Processors forum

SDK for DM368IPNC?