kernel image and rootsfs flashing for dm6446 board

hi,
i thinks its developing board TMS320DM6446A ... now i flashed u-boot kernel image and rootfs by using following link
processors.wiki.ti.com/.../UG:_DaVinci_PSP_Installation_on_DM644x_EVM
but after that i want add dvsdk and gstremer for that but its telling no space so i want to boot using u-boot please suggest me....

Parwath,

Could you describe step by step the commands which you are executing and console output?

BR
Tsvetolin Shulev

hi,
here is the link where i download the images for u-boot and kernel image
arago-project.org/.../
and i flashed using the following using serial nand flash utilities and tftp
processors.wiki.ti.com/.../UG:_DaVinci_PSP_Installation_on_DM644x_EVM

this is log output of the flashed rootfs
U-Boot > tftp 0x82000000 arago-base-image-arago.ext2.gz
TFTP from server 192.168.1.112; our IP address is 192.168.1.110
Filename 'arago-base-image-arago.ext2.gz'.
Load address: 0x82000000
Loading: #################################################################
#################################################################
#################################################################
###################
done
Bytes transferred = 3140505 (2feb99 hex)
U-Boot > nand erase 0x460000 0x300000

NAND erase: device 0 offset 0x460000, size 0x300000
Erasing at 0x75c000 -- 100% complete.
OK
U-Boot > nand write 0x82000000 0x460000 0x300000

NAND write: device 0 offset 0x460000, size 0x300000
3145728 bytes written: OK
U-Boot > setenv bootcmd 'nand read 0x82000000 0x460000 0x300000; nboot 0x80700000 0 0x60000; bootm'
U-Boot > setenv bootargs mem=120M console=/dev/ttyUSB0,115200n8 root=/dev/ram0 rw initrd=0x82000000,4M ip=dhcp
U-Boot > saveenv
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x0 -- 100% complete.
Writing to Nand... done
U-Boot > boot

NAND read: device 0 offset 0x460000, size 0x300000
3145728 bytes read: OK

Loading from NAND 64MiB 1,8V 8-bit, offset 0x60000
Image Name: Arago/2.6.31+2.6.32-rc1-r37+gitr
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1893880 Bytes = 1.8 MB
Load Address: 80008000
Entry Point: 80008000
## Booting kernel from Legacy Image at 80700000 ...
Image Name: Arago/2.6.31+2.6.32-rc1-r37+gitr
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1893880 Bytes = 1.8 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux........................................................................................................................... done, booting the kernel.

_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|

Arago Project http://arago-project.org arago ttyS0

Arago 2009.11 arago ttyS0

arago login: root


after this i wanna add dvsdk and gstremer for this but its showing no space in deivce


please suggest me.

i tried that command but its not valid command

Can you please attach the screen shot of the error ?
Where do you have the filesystem ?
NAND flash ?
If yes, size of the NAND flash ?

The only way is that you have to boot target via NFS.