SPI CC2530 with C5535eZDSP

Abraham Kancherla

Other Parts Discussed in Thread: CC2530

Hi,

I am trying to interface the eZDSP board with CC2530 using SPI. I am new to this and not sure about where to start. Can anyone suggest me a place to start. I have taken a look at the Design Note 113 (www.ti.com/.../swra223a.pdf). Should I just go ahead and implement this?

over 9 years ago

0 Lalindra Jayatilleke over 9 years ago

TI__Mastermind 30365 points

Abraham,

I'm not familiar with that design note on the CC2530. However, you may want to start by taking a look at the C55x CSL package located at http://software-dl.ti.com/dsps/dsps_public_sw/dsps_swops_houston/C55X/latest/index_FDS.html

This has SPI examples for the C5535eZdsp. The design note in conjunction with the CSL should get you moving in the right direction. Hope this helps.

Lali

0 Abraham Kancherla over 9 years ago in reply to Lalindra Jayatilleke

Prodigy 50 points

Hi, Thanks for your response,

I am not sure which SPI example to look at so that I can get an idea on how to work with SPI on the C5535eZDSP board. Also where can I find the design note for the CSL?

Thanks for your help.

Processors

Processors forum

SPI CC2530 with C5535eZDSP