DSP cpu utilization (trace analyzer)

Alfred Espinosa

Other Parts Discussed in Thread: SYSBIOS

HI Again,

I'm trying to see the dsp utilization in an OMAPL137 / TMS3206747 and tried to use the Tools > Hardware Trace Analyzer > PC Tace, it didnt work, it said an error message that was:

The target is connected
I don't know how to see if is supported or what i have to download, my connection is with a "Spectrum Digital XDS510USB Emulator"

My code works properly in the device, only this tools are failing,

How i can make it work? is my conecction able to do it?
I followed this tutorial, i get the same error http://www.ti.com/lit/ug/spruhm7b/spruhm7b.pdf
Is there a better way to see the DSP/ that specific core utilization?

Thanks in advance

Alfred Espinosa

over 9 years ago

0 Titusrathinaraj Stalin over 9 years ago

TI__Guru** 116100 points

Dear Alfred,
What is your CCS version ?

0 Shankari G over 9 years ago

TI__Mastermind 43955 points

Hi Alfred,

The same question is answered in the thread below. Please refer to it.

0 Titusrathinaraj Stalin over 9 years ago

TI__Guru** 116100 points

Dear Alfred Espinosa,
I have check with CCSv5.5 and the latest CCSv6.1.2, got the same problem, not sure about this problem.
Can you please check with our TI E2E CCS fourm where we can handle this type of posts effectively.

e2e.ti.com/.../81

0 Alfred Espinosa over 9 years ago in reply to Titusrathinaraj Stalin

Intellectual 570 points

Thanks Titusrathinaraj,

Actually the answer was in that forum, i needed to enable the UIA library (that comes in the Ti-RTOS) in the .cfg file

var LoggingSetup = xdc.useModule('ti.uia.sysbios.LoggingSetup');

And remove some other log initialization, for LoggerBuff.

Thanks

0 Shankari G over 9 years ago in reply to Alfred Espinosa

TI__Mastermind 43955 points

Alfred,

Good to hear that the problem is solved.

Processors

Processors forum

DSP cpu utilization (trace analyzer)