Regarding Xaui interface throughput Measurement!!!

Manjunath jayram

Dear TI,

in below mentioned document on page # 38 it is mentioned that

"The tests were run in a bare metal environment. Throughput was measured for multiple packet sizes. The Packet DMA descriptors were placed in MSMC SRAM and data buffers were placed in DDR3 memory."

http://www.ti.com/lit/an/sprabk5b/sprabk5b.pdf

Is there any sample source code available, which was used to these measurements on baremental environment ?

kindly let us know ASAP>

Regards

Manjunath

over 9 years ago

0 Raja over 9 years ago

TI__Guru* 81335 points

Is there any sample source code available, which was used to these measurements on baremental environment ?

It is not available to share it on the public forums. I will check with factory team and get back.

Thank you.

0 Manjunath jayram over 9 years ago in reply to Raja

Intellectual 580 points

Hello Raja,

is there any update regarding the testcode?

Regards

Manjunath

0 Raja over 9 years ago in reply to Manjunath jayram

TI__Guru* 81335 points

Apologize for the delay.

The throughput document was created using AVV data and may not be based on CSL examples/PDK drivers and it is not available as release package/format.

So we recommend you to use the CSL code in the RTOS SDK to develop your own test code.
Thank you.

0 Manjunath jayram over 9 years ago in reply to Raja

Intellectual 580 points

Hello Raja,

could you please provide some insights on CSL code in the RTOS SDK to develop your own test code?
while files I need to look into?

Regards
Manjunath

0 Raja over 9 years ago in reply to Manjunath jayram

TI__Guru* 81335 points

Please refer below path and files,

Path:
~\ti\pdk_k2hk_x_x_x\packages\ti\csl\

Files:
cslr_xge_cpsw.h
cslr_xge_cpsw_ss_s.h
cslr_xge_cpxmac_sl.h

Thank you.

Processors

Processors forum

Regarding Xaui interface throughput Measurement!!!