Build U-Boot for OMAPL138 LCDK

USER

Other Parts Discussed in Thread: OMAPL138

Hello,

I'm building U-boot for omapl138 LCDK. When entering the command ' make omapl138_lcdk_config CROSS_COMPILE=arm-arago-linux-gnueabi-' , there are some errors. The error shows

' make[1]: no rules to create target " omapl138_lcdk_config" stop

make: [omapl138_lcdk_config] error 2 '

Regards,

Sai.

over 9 years ago

0 Titusrathinaraj Stalin over 9 years ago

TI__Guru** 116100 points

Can you please attach the screen shot of the problem ?

0 USER over 9 years ago in reply to Titusrathinaraj Stalin

Intellectual 580 points

Here is the screem shot.

I'm not sure whether you are familiar with Chinese. so I write some simple translation.

' 没有规则可以创建目标' means ' no rules to create target ' in English

'停止 ' means ' Stop ' in English

' 错误' means ' Error ' in English

Thank you !

Regards,

Sai.

0 Titusrathinaraj Stalin over 9 years ago in reply to USER

TI__Guru** 116100 points

Your topic name is "Building u-boot" but still you are in Linux kernel source code and trying to build u-boot.
For u-boot, separate source code is available.
<OMAPL138 LCDK SDK directory>/board-support/u-boot-2010.12-psp03.21.00.04.lcdk/

0 USER over 9 years ago in reply to Titusrathinaraj Stalin

Intellectual 580 points

Thank you !

Processors

Processors forum

Build U-Boot for OMAPL138 LCDK