OS INDEPENDENT APPLICATION DEVELOPMENT ON KEYSTONE PROCESSORS

kaushal kumar1

Other Parts Discussed in Thread: TCI6636K2H

I want to purchase XTCIEVMK2X (TCI6636K2H evaluation module) and the HSCRK (DR-BOC + AFE7500 kit).

I searched TI website and found TI RTOS and LINUX OS support for application development on this kit XTCIEVMK2X.

Is there any software packages which allow application development in non OS environment for this kit.

Like for LCDK OMAP L138 kit OS independent STARTERWARES are there which provide all the BSP drivers needed for application development on these LCDK kits without any OS.

SO, can i get similar support for TCI6636K2H evaluation modules.???

I know CSL is there but I found it hard to find any OS independent examples specific to this EVM for my application development.

Please suggest ...

Regards

KAUSHAL KUMAR

over 10 years ago

0 Titusrathinaraj Stalin over 10 years ago

TI__Guru** 116100 points

Dear Kaushal,
Sorry, we don't have any (bare-metal) non-OS examples for K2H boards (keystone 1 and keystone 2)
But we have a platform example which is bare-metal code (non-OS)

C:\ti\pdk_k2hk_4_0_1\packages\ti\platform\evmk2h\platform_lib\src
C:\ti\pdk_k2hk_4_0_1\packages\ti\platform\evmk2h\platform_test

0 Raja over 10 years ago in reply to Titusrathinaraj Stalin

TI__Guru* 81335 points

We do not have starterware like package for keystone devices. As posted above you can refer platform examples for non-os example that uses CSL.

Thank you.

0 kaushal kumar1 over 10 years ago in reply to Titusrathinaraj Stalin

Prodigy 140 points

I wanted to know generally TCI6636K2H evaluation module or keystone architecture used for application with OS only or people are using them in bare metal or OS independent manner....
Also it would be very nice if you could suggest me any other kits from third party with TI communication processors(TCI66xx series) which do provide OS independent BSP for bare metal application development if available...

0 Titusrathinaraj Stalin over 10 years ago in reply to kaushal kumar1

TI__Guru** 116100 points

May I know the purpose of non-OS requirement and why don't prefer RTOS ?
BTW, you can also make the RTOS project to non-OS example.

0 kaushal kumar1 over 10 years ago in reply to Titusrathinaraj Stalin

Prodigy 140 points

For Defence Products baseband or physical layer modules cannot have COTS(Commercial Off The Shelf technology modules) .

Linux kernel provided/modified by TI and TI-RTOS kernal are COTS as we donot have our own OS KERNAL.

By the way are there any guidelines for how to convert a BIOS project TO NO BIOS .Please provide any document if available..

Regards

KAUSHAL KUMAR

Processors

Processors forum

OS INDEPENDENT APPLICATION DEVELOPMENT ON KEYSTONE PROCESSORS