• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 99 subscribers
  • Views 882 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Support for CPRI 16x Link Rate? (AIF2)

Melih Bayraker
Prodigy 40 points

Other Parts Discussed in Thread: TCI6638K2K

Hello Everyone,

Is there a way to configure AIF2 to support 16x line bit rate (9830.4  Mbit/s) over single CPRI link? We are using TCI6638K2K.

AIF2 Driver : 01.02.00.00.

SDK: pdk_keystone2_3_01_01_04

Regards,

Melih Bayraker

  • 0
    TI__Guru* 81335 points

    Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages (for processor issues). Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics (e2e.ti.com). Please read all the links below my signature.

    We will get back to you on the above query shortly. Thank you for your patience.

    Note: We strongly recommend you to create new e2e thread for your queries instead of following up on an old/closed e2e thread, new threads gets more attention than old threads and can provide link of old threads or information on the new post for clarity and faster response.

  • 0
    TI__Mastermind 21025 points

    Hi, no the K2K AIF2 Serdes lanes only operate up to 6.144Gbps. The K2L device has two AIL lanes that can operate at 16x (9.83Gbps).