perchasing the K2L-HSP FMC Adapter

Alber, Moon

Intellectual 720 points

I'm Alber as a FAE at Arrow Korea.

My customer are reviewing the Evaluation KIT to perchase as below.

www.ti.com/.../tidu963a.pdf

But they can not find the ordering part number in web-site which is related K2L-HSP FMC Adapter Rev.A

Would you please let me know the 'Adapter' ordering number?

over 10 years ago

0 Joseph Wu over 10 years ago

TI__Guru** 101115 points

Alber,

I'm moving this post to the Keystone Multicore forum. I believe this adapter was created by the engineers that watch over this forum, and isn't a part of the Data Converters group.

Regardless, I think the person that wrote the application note posts to this forum and may be able to help you here.

Joseph Wu

0 Raja over 10 years ago in reply to Joseph Wu

TI__Guru* 81335 points

Please reach out to your TI Field Application Engineer for this support / contact Sneha - nsnehaprabha@ti.com for information about the DLC card.

0 Alber, Moon over 10 years ago in reply to Raja

Intellectual 720 points

Hi, Rajasekaran K

my customer will perchase the Evaluation board.
then, should they perchase the adapter(K2L-HSP FMC Adapter Rev.A) separately?
or if they perchase the EVM set, does the adapter be included in the box?

0 Raja over 10 years ago in reply to Alber, Moon

TI__Guru* 81335 points

Hi,

I am not aware about this EVM and Box. Please contact Sneha for any information about this. Thank you.

0 Snehaprabha Narnakaje over 10 years ago in reply to Alber, Moon

TI__Intellectual 920 points

Hi,
K2L-HSP FMC adapter card is an internal board used to extend the FMC connectors and also to synchronize the clock across 3 EVMs. We can share the schematics and design files for this card. Alternatively you can use the FMC to FMC passive adapter using FMC<-->SMA and SMA<-->FMC cables.
Thanks
Sneha

0 Snehaprabha Narnakaje over 10 years ago in reply to Snehaprabha Narnakaje

TI__Intellectual 920 points

Hi,

You can download the schematics and design files for the K2L-HSP FMC adapter card from -

www.ti.com/.../TIDEP0060 Documents

It is "Optimized Radar System Using a DSP+ARM SoC Design Package (Adapter Card)" under Design files.

Thanks
Sneha

0 Raja over 10 years ago in reply to Snehaprabha Narnakaje

TI__Guru* 81335 points

Sneha,

Thank you for posting this information in forum.

0 Anjana Pathak0 over 10 years ago in reply to Snehaprabha Narnakaje

Expert 2205 points

what is the Alternative way of using the FMC to FMC passive adapter using FMC<-->SMA and SMA<-->FMC cables. How this can be achived?

Processors

Processors forum

perchasing the K2L-HSP FMC Adapter