C674X_0: Error connecting to the target: Connect to PRSC failed, -6305

Mayank Agarwal

Other Parts Discussed in Thread: OMAPL138

Hi,

I am facing the error as mentioned in subject line on doing connect to target after doing Launch configuration for ccxml file.

OMAPL138 I am working on.Also please find attached the image of target status when i am getting the error.

DSP is being held in reset,host is not able to bring out DSP out of reset.

Any solutions to the above issue.

Regards

Mayank

over 9 years ago

0 Akeem Whitehead over 9 years ago

TI__Mastermind 27950 points

We have moved your post to the appropriate forum.

0 Titusrathinaraj Stalin over 9 years ago

TI__Guru** 116100 points

Dear Mayank,
OMAPL138 is ARM boot master device and ARM will come out from sleep first then ARM should wakeup the DSP through gel file or running some bootloader code on ARM core (Enabling by setting the LPSC of DSP core).

So, please make sure that you have to connect the ARM core first then ARM gel file initialize all the peripherals including DSP core now you able to connect DSP core.

Processors

Processors forum

C674X_0: Error connecting to the target: Connect to PRSC failed, -6305