SM28VLT32-HT SPI flash device on OMAP-l137

Naveen Chandra

Other Parts Discussed in Thread: SM28VLT32-HT

Hello All,

Am using OMAPL-137 in my project for high temperature application. Also, to program the bin file to flash memory am using SM28VLT32SHKN device. Basically i want the boot my device from the flash memory.

So, can you please let me know if there are any utilities available to program the bin file to flash memory and boot from it??

Waiting for your reply at the earliest!!

Thanks & Regards

Naveen Chandra

over 9 years ago

0 Senthilkumar Srinivasan over 9 years ago

TI__Mastermind 43660 points

Hello Naveen,

Please refer the below wiki where you can find the utility to flash the bin file into SPI flash,

processors.wiki.ti.com/.../Serial_Boot_and_Flash_Loading_Utility_for_OMAP-L137

Regards,
Senthil

0 Naveen Chandra over 9 years ago in reply to Senthilkumar Srinivasan

Expert 1280 points

Hi Senthil,

Am specifically looking for SM28VLT32-HT SPI flash device. Could you please let me know for this device??

Waiting for your reply at the earliest!!

Thanks & Regards

Naveen Chandra

0 Titusrathinaraj Stalin over 9 years ago in reply to Naveen Chandra

TI__Guru** 116100 points

Have you used "SM28VLT32SHKN" flash on your custom board ?
If yes, you need to modify the SFH source code for your new flash and custom board, SPI flash info and SPI bus.
processors.wiki.ti.com/.../Serial_Boot_and_Flash_Loading_Utility_for_OMAP-L137

Able to erase your flash with this tool ?
What problem you are getting ?

Processors

Processors forum

SM28VLT32-HT SPI flash device on OMAP-l137