Is there any reference schematic design for connecting C6748 to ethernet PHY in RMII mode?

Mitesh Hiran

Other Parts Discussed in Thread: OMAPL138

Hi there, I am looking at the schematics of the LCDK6748 as a reference for my design but would like to know if there is any reference schematic for C6748 connecting to Ethernet PHY in RMII mode. Thanks.

Regards,

Mitesh

over 9 years ago

0 Senthilkumar Srinivasan over 9 years ago

TI__Mastermind 43660 points

Mitesh,

The LCDK board uses MII to interface with EMAC PHY. But the device supports both MII and RMII. To m y knowledge we do not have any reference design for RMII interface.

Regards,
Senthil

0 Titusrathinaraj Stalin over 9 years ago

TI__Guru** 116100 points

Dear Mitesh,
Can you please refer to the DA850 (OMAPL138) EVM board (Spectrum digital inc) which has RMII ?

0 Mitesh Hiran over 9 years ago in reply to Titusrathinaraj Stalin

Mastermind 6215 points

Great, thanks a lot Titus.

Processors

Processors forum

Is there any reference schematic design for connecting C6748 to ethernet PHY in RMII mode?