GEL expression - OnTargetConnect()

Andreas Unterberger

Expert 1140 points

since yesterday I'm not able anymore to debug my hardware. CCS constantly hangs in GEL expression: OnTargetConnect()

but I did not change anything. I only programmed some additional lines and now, ... hugh?

I already tried to:

- switch off and on the eval board

- resart CCS

- reboot PC

- do all of this things simultaneous

but nothing changed.

please help I'm really stuck on this when I can not debug ...

thanks in advance

Andreas

over 9 years ago

0 Andreas Unterberger over 9 years ago

Expert 1140 points

I just found out that a debug session can still be started via the target configurations tab. Maybe some sudden missconfiguration in the "Bug" debug configurations?

0 Raja over 9 years ago in reply to Andreas Unterberger

TI__Guru* 81335 points

Hi Andreas,
Please post this on CCS forum for appropriate and faster response.

0 Andreas Unterberger over 9 years ago in reply to Andreas Unterberger

Expert 1140 points

it seems there is a different problem now.
after I load the program immedately a reset of the cpu is triggered. I can confirm that it is connected with specifying a section which I then moved to the IPC-MSGRAM CTOM and MTOC.
I also just found the problem. I specified there an instance of a class. It seems that the processor has a problem with read/write access, when I specified only a normal array it works again.

0 Andreas Unterberger over 9 years ago in reply to Raja

Expert 1140 points

Thanks Raja for the quick response but the problems seem to be already solved!

Processors

Processors forum

GEL expression - OnTargetConnect()