trouble with ccs errors

nancy song

Intellectual 680 points

Hi all,

my errors as follows:

how can i add include options and libs to pass compile?

over 9 years ago

0 ToddMullanix over 9 years ago

TI__Guru* 96960 points

What device are you on? Are you using TI-RTOS (or SYS/BIOS)? Are you using TI's networking stack (NDK or CC3xxx Host driver) or lwIP? Can you paste the build output (or even better, attach a file with it)?

Todd

0 nancy song over 9 years ago in reply to ToddMullanix

Intellectual 680 points

Thaks a lot!

Yes, i install the rtos for tiva c software pocket.There are bios ,ndk and other pockets included:

i use ccs6.1 ,can you kindly help me to compile the project more properly.How can get through the errors?i know there is something i ignored,like resource patches and drivers.Here is my project:

4540.DistributedController_project_v1.zip

0 ToddMullanix over 9 years ago in reply to nancy song

TI__Guru* 96960 points

Can you attach the build output? I want to see the full build output from the CCS Console. The start of it will look like this

**** Build of configuration Debug for project DistributedController_project_v1 ****

"C:\\ti\\ccs6_1_3\\ccsv6\\utils\\bin\\gmake" -k all
'Building file: ../empty.cfg'
'Invoking: XDCtools'
"C:/ti/xdctools_3_31_01_33_core/xs"

0 nancy song over 9 years ago in reply to ToddMullanix

Intellectual 680 points

Hi Tod,
Thanks!
The problem is solved.It is due to some predefine and path option.I must learn more about the frame constructions and user guides of the sotfware kits supported by TI official website,especially the part of netware developement.

Processors

Processors forum

trouble with ccs errors