AM572x GP EVM camera module issue

Sanghoon Lee12

Prodigy 235 points

Other Parts Discussed in Thread: TMDSCM572X, AM5728

Hello, I bought AM5728 Camera Moudle(TMDSCM572X).

Below is the site link.

And I just follow the quick start guide.

Board get good operation.

However, camera module doesn't work.

Why camera module doesn't work ?

Please help me.

over 9 years ago

0 Biser Gatchev-XID over 9 years ago

TI__Guru**** 393215 points

Hi,

I will forward this to the software team.

0 Yordan Kovachev over 9 years ago

TI__Guru**** 161600 points

Hi,

When you start the dual camera demo from the Matrix GUI, do you get any error messages on the debug console? Can you share them?

Also which SDK are you using?

Best Regards,
Yordan

0 Sanghoon Lee12 over 9 years ago in reply to Yordan Kovachev

Prodigy 235 points

Maybe it was version 2.

does it need version 3 ?

0 Margarita Gashova over 9 years ago in reply to Sanghoon Lee12

TI__Guru* 80190 points

Hello,

You could try ls /dev/video* to check is it connected or not(search for /dev/video1 ).
You could try to disconnect and connect it again if it is not detected.
Please check this thread :
e2e.ti.com/.../1934433

Hope this helps.

BR
Margarita

Processors

Processors forum

AM572x GP EVM camera module issue