TMS320C6748 Beginner Level User Guide Request

muradaltay

Other Parts Discussed in Thread: TMS320C6748

Hi All,

Im new in DSP and I have a TMS320C6748 Hardware and I would like to begin DSP via basic examples like blink led or giving output from GPIO outputs.

Does anyone suggest any tutorial or code sample here.

Thanks for all.

Ozan SENYAYLA

over 9 years ago

0 Senthilkumar Srinivasan over 9 years ago

TI__Mastermind 43660 points

Hello,

Please refer C6748 starterware package for various example codes.

www.ti.com/.../starterware-c6dsp

processors.wiki.ti.com/.../StarterWare_01.20.01.01_User_Guide

Regards,
Senthil

0 muradaltay over 9 years ago in reply to Senthilkumar Srinivasan

Prodigy 170 points

I'm searching for step by step running an example application by using Code Composer Studio. I downloaded Starerware and installed. Im openning a new project and defining target configuration to my hardware. I can connect and upload basic "Hello World" c code. Im building to .c code and uploading the code to my hardware.

Now I have folder in C:/... for starter documents. How I can import an example application inside code composer studio. By the way, to see the outputs of code in terminal Im using TeraTerm, but its still black and there were nothing. After uploading the .out file to hardware should I plug out the Debug Probe hardware. Im connecting to see the results from UART_USB socket.

Thanks.

0 Shankari G over 9 years ago in reply to muradaltay

TI__Mastermind 43955 points

Hi ozlyee,

You can refer to the links below for importing the projects into CCS.

For connecting the target EVM to the PC via emulator,

http://processors.wiki.ti.com/index.php/Processor_SDK_RTOS_Setup_CCS#Create_Target_Configuration_File_for_EVM

Processors

Processors forum

TMS320C6748 Beginner Level User Guide Request