[K2G] AVB support

Naoki Kawada

Guru 19890 points

Hi,

Just a short question. According to K2G TRM, AVB seems to be supported with EMAC HW. In software perspective, do you have any solutions for Ethernet AVB on ProcSDK(Linux) ?

Best Regards,
Naoki

over 9 years ago

0 Raja over 9 years ago

TI__Guru* 81335 points

Hello Naoki-san,

I have assigned this to our factory experts. They will get back to you as soon as possible, Thank you for your patience.

0 Rex Chang over 9 years ago

TI__Guru 50170 points

Hi, Naoki,

The software requirements aren't clear to TI and there are still questions about it. One example is should the K2 devices be AVB switches or AVB endpoints. The current status of this feature is deferred and TI may look for outsourcing it.

Rex

0 Rahul Prabhu over 9 years ago

TI__Guru** 116170 points

Naoki-san,

The K2G device is capable of supporting AVB solution as specified in the K2G TRM however we don`t provide AVB solution in the current Processor SDK for K2G platform. At the moment, customers will need to look for suitable third party solutions in order to enable this feature.

Regards,
Rahul

0 Naoki Kawada over 9 years ago in reply to Rahul Prabhu

Guru 19890 points

Hi All,

Thanks for responding. Understood. I close this thread.

Best Regards,
Naoki

Processors

Processors forum

[K2G] AVB support