• State TI Thinks Resolved
  • Locked Locked
  • Replies 6 replies
  • Answers 2 answers
  • Subscribers 98 subscribers
  • Views 1136 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Flicket in Video on 1080p30 with DM368

Tarun Rawat15
Prodigy 60 points

Hi,

I am using IPNC RDK 5.1 for DM368 based Camera. When 1080p resolution with 30 FPS is configured then flicker has been started in video. Although 30 frames are coming. If FPS is reduced to 20-24 then flickering has been stopped. 

Please give suggestions to solve this

Thanks in advance

  • 0
    Mastermind 8775 points
    Hi,
    Can you share the videos of with and without flickering for further analysis?
  • 0 in reply to Prashanth Kumar15
    Prodigy 60 points

    Hi Prashant,

    Below is the video with flicker and jerks in video on 30 FPS


    Next is the video without any flickering or jerks

  • 0 in reply to Tarun Rawat15
    Mastermind 8775 points

    Hi,

    Thanks for the videos. On more analysis on videos, it seems that, encoder is getting wrong data, thus the jerkiness. Can you check camera output by dumping yuv.?

  • 0 in reply to Prashanth Kumar15
    Prodigy 60 points
    Prashant, I am new in this domain. Can you tell me how to take yuv dump ?
  • 0 in reply to Tarun Rawat15
    Mastermind 8775 points

    Hi Tarun,

    What I meant in my earlier post was, dump the raw data from camera. In other words, dump the data from camera before feeding to encoder.

  • 0 in reply to Prashanth Kumar15
    Mastermind 8775 points
    Hi Tarun,
    Is your issue resolved? Can you close this thread if its resolved and mark it as answered?