Ethernet protocol interface

sohrab sheikhsofla

Other Parts Discussed in Thread: OMAPL138, SYSBIOS

hi.... i want to transmit data with omap l138 with ethernet interface but i dont find C code file or library like psp file for spi in ethernet interface ..... if any body hae this file for using in ccs for omap l138 please show me link address of it .....thank

over 9 years ago

0 Raja over 9 years ago

TI__Guru* 81335 points

sohrab sheikhsofla ,

Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages (for processor issues). Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics (e2e.ti.com). Please read all the links below my signature.

We will get back to you on the above query shortly. Thank you for your patience.

Note: We strongly recommend you to create new e2e thread for your queries instead of following up on an old/closed e2e thread, new threads gets more attention than old threads and can provide link of old threads or information on the new post for clarity and faster response.

0 Raja over 9 years ago

TI__Guru* 81335 points

Please install the MCSDK released for this device. This will have the required NDK examples for testing ethernet interface. Please find the link below.

Thank you.

0 Titusrathinaraj Stalin over 9 years ago

TI__Guru** 116100 points

You would get NDK based EMAC examples from NSP package of OMAPL138.
C:\ti\nsp_1_10_00_03\packages\ti\ndk\examples\ndk_evmOMAPL138_arm9_helloWorld
C:\ti\nsp_1_10_00_03\packages\ti\ndk\examples\ndk_evm6748_elf_helloWorld

0 sohrab sheikhsofla over 9 years ago in reply to Titusrathinaraj Stalin

Prodigy 20 points

i find the file sdk that you say... but when i run C:\ti\nsp_1_10_00_03\packages\ti\ndk\examples\ndk_evm6748_elf_helloWorld ccs show error that can not find( ti/sysbios/BIOS.h) how can i find it for adding in software.??

0 Raja over 9 years ago in reply to sohrab sheikhsofla

TI__Guru* 81335 points

Please post this on TI-RTOS forum for faster and appropriate response. Thank you.

0 Titusrathinaraj Stalin over 9 years ago in reply to sohrab sheikhsofla

TI__Guru** 116100 points

Can you please post your error log or screen shot of the problem ?

Processors

Processors forum

Ethernet protocol interface