Data Problem for image processing with TMSC320C6748(LCDK)

mete

Other Parts Discussed in Thread: OMAP-L138, TMS320C6748, OMAPL138

Hi,

I know I am total beginner. Here is my problem: I want to write images to my lcdk kit. I cannot use USB OTG port. So, I think I have 2 options. One of them is writing sd card the other one is writing to ramdisk.

Is there any example for writing to sd card? Because, I am too new and I do not want to struggle with this issue.
For the second option, I found a example in starterware package. In the example, I saw some lines about lcd. What is that for?

How can I easily access a image for image processing algorithms?

Thank you for your asistance

over 10 years ago

0 Shankari G over 10 years ago

TI__Mastermind 43955 points

Hi mete,
1) You can flash the images via UART using serial flash utility.
processors.wiki.ti.com/.../Serial_Boot_and_Flash_Loading_Utility_for_OMAP-L138

2) You can also flash the images via debugger using CCS flash writers project.
processors.wiki.ti.com/.../OMAP-L138_Software_Design_Guide
C:\ti\OMAP-L138_FlashAndBootUtils_2.40\OMAP-L138\CCS\NANDWriter

0 mete over 10 years ago in reply to Shankari G

Prodigy 160 points

Hi, thank you for your reply I will check the links tomorrow thanks but what I do not understand is that your link says omap-l138. My card is TMS320C6748 LCDK.

0 Shankari G over 10 years ago in reply to mete

TI__Mastermind 43955 points

Hi mete,

mete said:
but what I do not understand is that your link says omap-l138.

That link is appropriate for both C6748 and the OMAPL138. The DSP core of OMAPL138 is C6748.

Processors

Processors forum

Data Problem for image processing with TMSC320C6748(LCDK)