• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 564 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM5728 IO Delay Calibration

Ronak Kotak
Intellectual 270 points
Other Parts Discussed in Thread: AM5728

Hi,

I am using various high speed interfaces like eMMC,GMAC,VIN port 1 & 2 in my design.

As per  AM5728 Datasheet :7.5 Virtual and Manual I/O Timing Modes & AM57xx  TRM :18.4.6.1 Pad Configuration, do we need to do any IO delay calibration for the above interfaces to work or simple pin mux configuration will work. Kindly confirm??