How to Load to MLO and Own Application in to NAND Flash for AM3352 Module

Starter ware .bin file is 35MB it's possible load NAND flash to DDR.

Sorry, I don't understand what you are asking.

- In these case we don't have 1st stage of Boot loader and 2nd stage of boot loader.
- Directly use starterware and it's run application

for Example MLO it's Present in internal RAM (1st stage of Bootloader) its 4 KB size it's do some Initialization like Enable DDR, PLL for AM3352 and Provide a Platform for loading U-boot.
- like wise Here Starterware.bin file size is 35 MB, how it's Loads?

ok. Thanks for that...


Here,

There is No First and second stage of Boot loader concept only
AM335X_StarterWare_02_00_01_01_Setup.bin and It's start my Application... correct ?

Yes, this is correct.

Thanks Biser.

Hi Biser,

I have a Dought, How to Know These Starterware.bin file knows My Application, My application is Matrix_app, Thse .bin file contains there is no information about the Matrix_app.

Please clarify how to Link Happen?

I saw the source code of Starterware, These source code contails There is No make file, how to compile that source code, and What are the files to compile at the time of compiling.
like, U-boot -start.s, Crt0.s ...etc files are Used, Here what are the starting files are to invoke at that compile time.

Please Briefly Explain me??.

- With the help of starter ware it is possible to load my Own application ???
- It's possible, how to load My Own applicationg E.g Matrix_app ???\
- Please Explain Breiefly, I am New Person to the Bootloaders.