Lauterbach .per and .mem files for AM57xx?

Matthias Schmitt

Dear all,

I am looking for the .per and .mem files of the AM57xx processors to be used with the Lauterbach tool-chain. Please let me know where to get these files from.

BR,
Matthias

over 9 years ago

0 Biser Gatchev-XID over 9 years ago

TI__Guru**** 393215 points

Hi Matthias,

You should advise your customer to turn to Lauterbach. We support only CCS.

0 Matthias Schmitt over 9 years ago in reply to Biser Gatchev-XID

TI__Expert 5540 points

They are in contact wit Lauterbach and they have sent them to TI, as these files are coming obviously from TI under NDA and are not distributed by Lauterbach.
I have seen similar discussions in older E2E posts
BR,
Matthias

0 Biser Gatchev-XID over 9 years ago in reply to Matthias Schmitt

TI__Guru**** 393215 points

OK, I will notify the factory team. They should get in touch with you.

0 Rogerio Almeida over 9 years ago in reply to Biser Gatchev-XID

TI__Mastermind 26215 points

here is what Lauterbach has told us:

" Check the website www.lauterbach.com.
There he should enter AM572x in the chip search field.
As a response he'll get 4 different configurations, that would make sense"

Lauterbach is a 3P and they should be contacted directly for AM57x support,.

Processors

Processors forum

Lauterbach .per and .mem files for AM57xx?