OpenEmbedded with OMAP-L138 eXperimenter Kit

bhargav adigarla11

Other Parts Discussed in Thread: OMAPL138

Hi,
I want to build root filesystem for omapl138 using open embedded. can you please share the procedure or links.

Thanks in advance
Bhargav

over 8 years ago

0 Titusrathinaraj Stalin over 8 years ago

TI__Guru** 116100 points

Please refer to the following TI wiki page.
processors.wiki.ti.com/.../Arago_build_recipe_for_OMAPL1

0 bhargav adigarla11 over 8 years ago in reply to Titusrathinaraj Stalin

Intellectual 270 points

Hi Titus,
Thanks for your response. Below is my requirement.

I have dm365. I cross compiled linaro toolchain by using ABE. I need root filesystem which is having support for systemd. So, above link is enough or any other things i need to do?

Thanks & Regards
Bhargav

0 Titusrathinaraj Stalin over 8 years ago in reply to bhargav adigarla11

TI__Guru** 116100 points

For DM365 based question, please post it in below DM3x forum or Linux forum.
e2e.ti.com/.../100
e2e.ti.com/.../354

Processors

Processors forum

OpenEmbedded with OMAP-L138 eXperimenter Kit