configuring UVC Support to interface USB cam

Mohammed Hussain

Expert 1500 points

how to configure UVC support to interface USB cam to OMAP l138 please share related doc or web pages

0 Dwarakesh Radhakrishnan over 8 years ago

Guru 13660 points

Hi Mohammed,

Assuming you are using Linux,

Please find processors.wiki.ti.com/.../Usbgeneralpage

Also make sure OMAP is configured in Host mode. processors.wiki.ti.com/.../Usbgeneralpage

0 Titusrathinaraj Stalin over 8 years ago

You should enable the UVC driver support in Linux kernel using make menuconfig.
Please refer to this wiki page.
processors.wiki.ti.com/.../Building_03.22_PSP_release_Components_for_OMAP-L138

Processors forum