Run PHP application on OMAP L138 LCDK (linux arago)

Manish Hiran

Other Parts Discussed in Thread: OMAPL138

Hi there,

I'm new to embedded systems, I am trying to build a PHP application on ARM (OMAP L138 LCDK - arago linux)

For PHP, I am trying to install PHP 5.6, Apache or Lighttpd , but not sure where to begin ...

Can you help me understand how can I go about in achieving this , please?

I have setup TFTP and NFS from my Ubuntu 16 LTS box, target box is arago linux (OMAP L138 LCDK), I was trying to follow samarthparikh.blogspot.co.uk/.../cross-compile-lighttpd-php-for-arm.html but unable to install lighttpd.

I followed http://processors.wiki.ti.com/index.php/OMAP-L138_LCDK_Linux_SDK_Getting_Started_Guide and got hello world in C working, but I'm still not sure where / how should I install LAMP and where can I find cross complied version

over 8 years ago

0 Titusrathinaraj Stalin over 8 years ago

TI__Guru** 116100 points

Please refer to this link for lighttpd binaries for armv5 architecture device like OMAPL138.
hex.ro/.../

Try to untar it on your board and run.

0 Manish Hiran over 8 years ago in reply to Titusrathinaraj Stalin

Intellectual 610 points

Hi Titus,

I uncompressed the package in root level of my board,

and ran,

root@omapl138-lcdk:/# tar xf /home/root/php-5.4.2_lighttpd_1.4.29_armv5.tar.gz
root@omapl138-lcdk:/# ./system/xbin/reload_fcgi.sh
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill]
root@omapl138-lcdk:/# ./system/xbin/reload_lighttpd.sh
kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill]
./system/xbin/reload_lighttpd.sh: line 2: lighttpd: command not found

but as this isn't a android box, I did following,

cp -r /system/bin/. /bin/.

cp -r /system/etc/. /etc/.

cp -r /system/var/www/. /var/.

then ran,

Now when I go to board's IP from my windows or Ubuntu 16, I'm getting 503 / 500 HTTP error

root@omapl138-lcdk:/# which lighttpd
/bin/lighttpd
root@omapl138-lcdk:/# ./bin/lighttpd -v
lighttpd/1.4.29 - a light and fast webserver
Build-Date: Sep 16 2011 14:23:19

root@omapl138-lcdk:/# which php
/bin/php
root@omapl138-lcdk:/# ./bin/php -v
Illegal instruction