evmskAM335x booting starterware from sd card not working

key dongle

Intellectual 545 points

Hi,

Board: AM335x Starter Kit -- TMDSSK3358

Starterware: AM335X_StarterWare_02_00_01_01

SD files:

x:\ti\AM335X_StarterWare_02_00_01_01\binary\armv7a\cgt_ccs\am335x\evmskAM335x\bootloader\Release_MMCSD\MLO

x:\ti\AM335X_StarterWare_02_00_01_01\binary\armv7a\cgt_ccs\am335x\evmskAM335x\grlib_demo\Release\app, which renamed from "grlib_demo_ti.bin"

Steps:

But, it didn't work, after power on, there was no desired result.

Any suggestions are appreciated.

Thanks a lot!

over 9 years ago

0 Lalindra Jayatilleke over 9 years ago

TI__Mastermind 30365 points

Hi,

Is the correct .cmd file for SK used in your project?

https://e2e.ti.com/support/embedded/starterware/f/790/t/425603

Lali

0 qxc over 9 years ago

Genius 5820 points

Any output on the serial console?

0 key dongle over 9 years ago in reply to Lalindra Jayatilleke

Intellectual 545 points

Thank you very much, i have found the reason, which is the sd card not set as "active" partition . The files are OK. Thanks God!
processors.wiki.ti.com/.../AM335x_Starter_Kit_ID_Memory_Programming

0 key dongle over 9 years ago in reply to qxc

Intellectual 545 points

The terminal display several 'C' characters and no more other characters.

Thank you very much, i have found the reason, which is the sd card not set as "active" partition . The files are OK. Thanks God!

http://processors.wiki.ti.com/index.php/AM335x_Starter_Kit_ID_Memory_Programming

Processors

Processors forum

evmskAM335x booting starterware from sd card not working