NDK & NSP for TMS320C6455

Nickolay

Other Parts Discussed in Thread: TMS320C6455, SYSBIOS

Good day!
By using DSP TMS320C6455. What is the latest version of the NDK and NSP supports this processor? Please give me a link.
I have installed CCS 5.5, SYS / BIOS 6.33s, XDS 3.25.

I am hope for your help!

over 9 years ago

Sasha Slijepcevic over 9 years ago

TI__Mastermind 37985 points

From release notes, it seems that you should use NDK 2.23.02.03 and then download C6455 NSP separately from here software-dl.ti.com/.../index.html, there is a link near the bottom of the page that says that the package is for NDK 1.92, but it should work for newer NDKs.

Here is a link for NDK 2.23: downloads.ti.com/.../index_FDS.html

But, you'll have to upgrade SYS/BIOS to at least SYS/BIOS 6.37. Any XDCtools 3.25 should be fine, but NDK 2.23.02.03 is built with XDCtools 3.25.04.88 so you may want to go with that just in case.

Nickolay over 9 years ago in reply to Sasha Slijepcevic

Prodigy 180 points

Thanks for the answer!
I'm sorry, but I did not realize that I should download the "C6455 EMAC Driver for NDK 1.92" or "C6455 NSP for NDK 1.94"?

Sasha Slijepcevic over 9 years ago in reply to Nickolay

TI__Mastermind 37985 points

I think these are two versions of the same package so I would go with the newer one 'C6455 NSP for NDK 1.94'.

Nickolay over 9 years ago in reply to Sasha Slijepcevic

Prodigy 180 points

Thanks for the answer!
I can not install the NSP 1.94 at NDK 2.23. NSP is not displayed in the CCS and I can not turn the EMAC in the SYS / BIOS.
There are detailed instructions for installing the NSP 1.94 at NDK 2.23?

Nickolay over 9 years ago in reply to Sasha Slijepcevic

Prodigy 180 points

I do not know what to do.
Please, help. Please, how do I install the driver for 6455 using CCS 5.5 and BIOS 6.xx

Maybe you have adapted the NSP under the SYS/BIOS?

Sasha Slijepcevic over 9 years ago in reply to Nickolay

TI__Mastermind 37985 points

Can you give me more details about what you did and what happened? I'll try to replicate the problem.

Nickolay over 9 years ago in reply to Sasha Slijepcevic

Prodigy 180 points

Hello!
I did everything according to these instructions: e2e.ti.com/.../199858
When you compile the project, the message: "../0385.ethdriver.c", line 266: error # 137: struct "_pdinfo" has no field "PBMQ_rx"
1 error detected in the compilation of "../0385.ethdriver.c".

What am I doing wrong? You can help me?
Attached is a copy of the project.

6557.ndk_evm6748_coff_helloWorld.rar

Nickolay over 9 years ago in reply to Nickolay

Prodigy 180 points

Also, tell me, where can I get <std.h> and <sys.h>? These are files which module: xds or sysbios?

Sasha Slijepcevic over 9 years ago in reply to Nickolay

TI__Mastermind 37985 points

The document sprufp2a.pdf - NSP Ethernet Driver Design Guide, that should be available in your NDK docs, describes the structure _pdinfo. It seems you need to define a macro _INCLUDE_NIMU_CODE to make PBMX_rx field available.
As for std.h and sys.h, these are DSP/BIOS header files. You are using SYS/BIOS so you should be referencing equivalent SYS/BIOS header files <xdc/std.h> and <xdc/runtime/System.h>. Which of your source files are referencing DSP/BIOS header files?

Processors

Processors forum

NDK & NSP for TMS320C6455