AM572x RTOS MLO build

Chethan Shetty

Intellectual 760 points

Other Parts Discussed in Thread: AM5728

Hi,

How to build MLO in AM5728 SDK RTOS 3.0. Please explain with steps.

BR,

Chethan

over 8 years ago

0 Chethan Shetty over 8 years ago

Intellectual 760 points

Guys please someone comment on this, its kind of urgent!!!

Chethan

0 lding over 8 years ago in reply to Chethan Shetty

TI__Guru* 95265 points

Go to pdk_am57xx_1_0_4\packages:
-run "pdksetupenv" to setup your env
-run "gmake sbl"

Regards, Eric

0 Chethan Shetty over 8 years ago in reply to lding

Intellectual 760 points

Eric,

What if my build environment is linux??

Chethan

0 lding over 8 years ago in reply to Chethan Shetty

TI__Guru* 95265 points

Linux env is the same:
-run "pdksetupenv.sh"
-run "make sbl"

Regards, Eric

0 Chethan Shetty over 8 years ago in reply to lding

Intellectual 760 points

Eric,

Thanks for the immediate response.

I'm generally asking what does section means

http://processors.wiki.ti.com/index.php/Processor_SDK_RTOS_DIAG#Creating_the_SD_Card_Loadable_Files

why nowhere mentioned this simple commands??

Chethan

0 lding over 8 years ago in reply to Chethan Shetty

TI__Guru* 95265 points

Chethan,

The link you mentioned is to build the diag, not including MLO.

Here is the link: processors.wiki.ti.com/.../Processor_SDK_RTOS_Building_The_SDK, this mentioned "make all" for all modules, as the top level makefile. For you, you are just interested in SBL/MLO, so I suggested "make sbl" to save the time.

Regards, Eric

0 Chethan Shetty over 8 years ago in reply to lding

Intellectual 760 points

Eric,

As your suggestion i have tried to build MLO by following commands,
-run "pdksetupenv.sh"
-run "make sbl"

but getting following error

chethan@chethan:~/ti/pdk_am57xx_1_0_3/packages$ make sbl
make -C ./ti/board all
make[1]: Entering directory `/home/chethan/ti/pdk_am57xx_1_0_3/packages/ti/board'
makefile:33: /ti/build/Rules.make: No such file or directory
make[1]: *** No rule to make target `/ti/build/Rules.make'. Stop.
make[1]: Leaving directory `/home/chethan/ti/pdk_am57xx_1_0_3/packages/ti/board'
make: *** [board_lib] Error 2

Chethan

0 lding over 8 years ago in reply to Chethan Shetty

TI__Guru* 95265 points

Are you able to "make all"? I think you installed CCS and PDK in your customized paths and we have discussion in another E2E thread resolved this. If you can "make all" then there shouldn't any issue to build sbl only.

Regards, Eric

0 Chethan Shetty over 8 years ago in reply to lding

Intellectual 760 points

Eric,

Yes i can able to make all and i can able to build sbl.

Chethan

Processors

Processors forum

AM572x RTOS MLO build