• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 315 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

On DA708 board, problem faced while loading and running the executable

prasanna joshi
Prodigy 40 points

Hi,

             I build executable in CCS 3.1 C672x XDS510USB emulator. When i loaded that executable on the target and run, it was hanging and it didn't come out. When i again loaded the same executable and run, it ran completely and came out. When i repeated loading and running continuously the same executable, i could see it was alternatively running and hanging.

           And also i observed that if i load the executable continuously twice and then try to run, its executing properly. Can anyone please help me if i am wrong anywhere or anything i am suppose to take care before loading and running executable?

 

Thanks,

Prasanna