TCI6636K2H: PDK Rebuild Error com.ti.rtsc.IPC

Namki Lee

Part Number: TCI6636K2H

Hi,

I'm building the pdk_keystone2.

help me.

--------------------------------------------------------------------------------------------------------------------------------------------------------

root@nklee-linux:/opt/ti/pdk_keystone2_3_01_02_05/packages# ./pdkProjectCreate.sh k2h little
=========================================================================
. DEVICE_NAME : k2h
. ENDIAN : little
. MODULE : all
. PDK_SHORT_NAME : /opt/ti/pdk_keystone2_3_01_02_05/packages
=========================================================================
found ./serdes_diag_ber_K2HC66ExampleProject.txt

--------------------------------------------------------------------------------
Creating project 'serdes_diag_ber_K2HC66ExampleProject'...

  !ERROR: No RTSC products of type 'com.ti.rtsc.IPC' are currently installed!

found ./serdes_diag_prbs_K2HC66ExampleProject.txt

--------------------------------------------------------------------------------
Creating project 'serdes_diag_prbs_K2HC66ExampleProject'...

  !ERROR: No RTSC products of type 'com.ti.rtsc.IPC' are currently installed!

found ./serdes_diag_eye_K2HC66ExampleProject.txt
^C
root@nklee-linux:/opt/ti/pdk_keystone2_3_01_02_05/packages#

over 8 years ago

0 Yordan Kovachev over 8 years ago

TI__Guru**** 161600 points

Hi,

It seems that CCS does not find the IPC package.

You need to install the full SDK on your pc in the same directory as CCS, so that Code Composer Studio can automatically find all the packages and add them to its environment.

Try following this guide to discover the IPC package:
processors.wiki.ti.com/.../Processor_SDK_RTOS_Setup_CCS

Also see the following wiki:
processors.wiki.ti.com/.../Processor_SDK_RTOS_Install_In_Custom_Path
it provides info on customizing your build environment.

Hope this helps.

Best Regards,
Yordan

0 Namki Lee over 8 years ago in reply to Yordan Kovachev

Prodigy 90 points

With your help, my problem was resolved.

Thank you.

I have another question.

When directory of ipc_x_x removed, ipc_x_x is not show on ccsstudio->window->preference->Code Composer Studio->RTSC.

How do I register it again?

In fact, I delete that directory and I had to download ipc_x_x again. But ipc_x_x was not regist. So I had to download other version.

Best Regards,

Namki

Processors

Processors forum

TCI6636K2H: PDK Rebuild Error com.ti.rtsc.IPC