Linux/DRA746: How to make uImage for PSDKLA v3

kenshow

Genius 3725 points

Part Number: DRA746

Tool/software: Linux

Hi,

Please let me know how to create uImage on the PSDKLA v3.00.00.03 with Vayu board.

Best Regards,
Kenshow

over 9 years ago

0 Ramprasad over 9 years ago

TI__Mastermind 30480 points

Are you looking to prepare SD card with PSDkLA 3.00 images? If yes
cd $PSDKLA_INSTALL_DIR
sudo ./binmksdboot.sh --device /dev/sdx --sdk $PSDKLA_INSTALL_DIR

or if you are looking to build zImage , ./bin/fetcch-sources.sh will download kernel and u-boot source.
make linux will build zImage.

0 kenshow over 9 years ago in reply to Ramprasad

Genius 3725 points

Hi,

Your suggestion is zImage and copy the pre-image.
I would like to create uImage.

Thanks,
Kenshow

0 Pavel Botev over 9 years ago in reply to kenshow

TI__Guru**** 170625 points

Hi Kenshow,

Have you tried with "make uImage"? See the below pointers for more details:

processors.wiki.ti.com/.../Linux_Core_VPE_User's_Guide
processors.wiki.ti.com/.../Linux_Core_SATA_User's_Guide
processors.wiki.ti.com/.../SD_User's_Guide

Note also that uImage is used fro QSPI boot, see the below wiki pages for more info:
processors.wiki.ti.com/.../Processor_SDK_Linux_Automotive_Software_Developers_Guide
processors.wiki.ti.com/.../Linux_Core_U-Boot_User's_Guide

See also the below e2e threads:
e2e.ti.com/.../358045
e2e.ti.com/.../329253
e2e.ti.com/.../423917

Regards,
Pavel

0 kenshow over 9 years ago in reply to Pavel Botev

Genius 3725 points

Hi Pavel,

Yes, I have. The make command is as follows:

$ make LOADADDR=<Address> ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- uImage

Regards,
Kenshow

Processors

Processors forum

Linux/DRA746: How to make uImage for PSDKLA v3