RTOS/CC430F6137: error #10010: errors encountered during linking

grga

Part Number: CC430F6137

Tool/software: TI-RTOS

Hi,

I’m trying to make project with CC430f6137 and TI-RTOS (TI-RTOS for MSP430x 2.20.0.06). If I want to translate the code, I get the following errors:

#10010 errors encountered during linking;

Regards

over 9 years ago

0 Emmanuel Trinidad - Alicea over 9 years ago

TI__Genius 10260 points

Hi Admir,

Looks like some of the linker output is missing, can you please copy the error messages again?

Thanks,
-- Emmanuel

0 grga over 9 years ago in reply to Emmanuel Trinidad - Alicea

Intellectual 560 points

Hi Emmanuel,

here is:

error #10269: output file "mein drittes rtos.out" exceeds code size limit

remark #10371-D: (ULP 1.1) Detected no uses of low power mode state changing instructions

error #10010: errors encountered during linking; "mein drittes rtos.out" not built

>> Compilation failure

makefile:141: recipe for target 'mein drittes rtos.out' failed

gmake: *** [mein drittes rtos.out] Error 1

gmake: Target 'all' not remade because of errors.

Thanks,

Admir

0 Emmanuel Trinidad - Alicea over 9 years ago in reply to grga

TI__Genius 10260 points

Hi Admir,

Previously, CCS enforced code size limitations for unlicensed versions of the development environment. Recently, TI has made CCS freely available to customers & developers. Please see the link below for information on how to upgrade/add a full CCS license.

http://processors.wiki.ti.com/index.php/Licensing_-_CCS

Hope this helps,

-- Emmanuel

0 grga over 9 years ago in reply to Emmanuel Trinidad - Alicea

Intellectual 560 points

Hi Emmanuel,

is it only for CCSv4 and CCSv5?

Regards,

Admir

0 Emmanuel Trinidad - Alicea over 9 years ago in reply to grga

TI__Genius 10260 points

Hi Admir,

The new licensing applies to CCSv4, v5 & v6 (also on that link I sent you). CCSv7 does not have the licensing requirement.

Regards,
-- Emmanuel

Processors

Processors forum

RTOS/CC430F6137: error #10010: errors encountered during linking