Linux: How to flash a linux image to am572x EVM EMMC card

Govindaraji Sivanantham

Other Parts Discussed in Thread: UNIFLASH

Tool/software: Linux

Hello TI,

Like create-sdcard.sh script for SD card from Linux SDK, How can I flash Linux image to am572x EVM board EMMC memory using a script from host PC.

over 9 years ago

0 Yordan Kamenov over 9 years ago

TI__Mastermind 42515 points

Hi Govindaraji,

please check if the scripts in last two messages in this thread can help you:

e2e.ti.com/.../488408

(just note that they are intended to be run on the board, not the host PC)

Regards,
Yordan

0 Govindaraji Sivanantham over 9 years ago in reply to Yordan Kamenov

Intellectual 900 points

Hello Yordan,

Thank you for your reply.

Do i have any tool or utility to falsh am572x-evm board eMMC From Host PC. Flashing Production image from target is extra burden for us.
I had seen uniflash Program for am335x NAND flash. something Similar i am looking out for am572x-evm eMMC flash.

0 Yordan Kamenov over 9 years ago in reply to Govindaraji Sivanantham

TI__Mastermind 42515 points

Hi Govindaraji,

you can have look at the utility described here:

e2e.ti.com/.../2035808

or try to use dfu-util:

processors.wiki.ti.com/.../Linux_Core_U-Boot_User's_Guide

Regards,
Yordan

Processors

Processors forum

Linux: How to flash a linux image to am572x EVM EMMC card