Hi, Everyone
I have a question about eMMC boot of AM335x.
My customer want Raw mode boot of eMMC boot using MMC1 boot.
It was success. but It is failed after board revision change.
(It is no change around AM335x)
We look PC is loop
and We got tracing vector values below:
===========OK===========
0x0010009F
0x0001E000
0x00000000
===========NG===========
0x0000907F
0x0000F000
0x00111000
Do you know why it is failed ?
Have you ever had same situation ?
We want some advice.
We guess CHESTSETTING and GP Header are not found.
Best Regards
Hiroyasu