AM5728: Pinmux tool functions

matusan

Guru 10235 points

Part Number: AM5728

Hello, TI Experts,

Our customer requires to explain the PINMUX-Tool support functions for AM5728.

Our understanding is as follows;

For example:

Based on TRM(SPRUHZ6H) "Table 18-1157. CTRL_CORE_PAD_GPMC_AD0"

- WAKEUPENABLE : cannot be configure by PINMUX-Tool

- SLEWCONTROL : cannot be configure by PINMUX-Tool

- INPUTENABLE : cannot be configure by PINMUX-Tool

- PULLTYPESELECT: CAN be configure by PINMUX-Tool

- PULLUDENABLE: CAN be configure by PINMUX-Tool

- MODESELECT: cannot be configure by PINMUX-Tool

- DELAYMODE : cannot be configure by PINMUX-Tool

- MUXMODE: CAN be configure by PINMUX-Tool

Is this understanding correct?

If there is some misunderstanding, please tell us.

Best regards,

0 Biser Gatchev-XID over 9 years ago

Hi,

INPUTENABLE is also configured in the pinmux tool.

0 matusan over 9 years ago in reply to Biser Gatchev-XID

Guru 10235 points

Hi,

Thank you for your prompt replay.

This information is very helpful!

We checked PINMUX-Tool GUI,

then we found "Rx" check box.

So, our understanding is as follows;

This "Rx" check box specify "INPUTENABLE=1(Receive mode is enabled)".

Is this understanding correct?

We would appreciate if you tell us how to specify "INPUTENABLE" by PINMUX-TOOL.

Best regards,

0 Biser Gatchev-XID over 9 years ago in reply to matusan

Yes, you understood correctly.

0 matusan over 9 years ago in reply to Biser Gatchev-XID

Guru 10235 points

Hi,

Thank you for your kindness.
I really appreciate your help.

Best regards,

Processors forum