Linux/AM5728: GDB remote debugging in qt creator

Ilya Kravchuk

Part Number: AM5728

Tool/software: Linux

I'm working with am5728 evm board.
When I'm working with CCS I use very convenience way with gdbserver to debug programms on the target.
Now I'm working with QtCreator and I can't found any information about remote debuggin.
Can anybody help me to configure remote debugging in QtCreator?

over 8 years ago

0 Kemal R. Shakir over 8 years ago

TI__Guru 55345 points

Hello Ilya,

Check this guide. Lately on AM335x platform the qt debugging was broken due to SIGSEGV, if this segmentation fault also occur on AM572x platform we will have to dig in to it and try to find out why this error occur.

Best regards,
Kemal

0 Ilya Kravchuk over 8 years ago in reply to Kemal R. Shakir

Expert 1520 points

When I'm trying to launch debug, segmentation error appears. Is it the same result like with AM335x?

I've read from this topic, that I should to install qt libs for debugging. But couldn't find qtbase-dbg_xxx_armv7ahf-neon.ipk in this sdk. Where I can find this libraries?

0 Kemal R. Shakir over 8 years ago in reply to Ilya Kravchuk

TI__Guru 55345 points

Yes, it is the same. You can find the qtbase-dbg_xxx_armv7ahf-neon.ipk is at this location:
<tisdk>/build/arago-tmp-external-linaro-toolchain/work/armv7ahf-neon-linux-gnueabi/qtbase/5.6.2+gitAUTOINC+b4ada3f0d8-r0.arago12.tisdk1/deploy-ipks/armv7ahf-neon/

Processors

Processors forum

Linux/AM5728: GDB remote debugging in qt creator